Mps Configuration - Asus TS100-E3 Manual

USB Function [8 USB Ports] USB Function [8 USB Ports] USB Function [8 USB Ports]
USB Function [8 USB Ports] USB Function [8 USB Ports]
Allows you to enable a specific number of USB ports, or disable the USB
function. Configuration options: [Disabled] [2 USB Ports] [4 USB Ports] [6
USB Ports] [8 USB Ports]
Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of legacy USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no legacy
USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled]
USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]
BIOS EHCI Hand-off [Enabled] BIOS EHCI Hand-off [Enabled] BIOS EHCI Hand-off [Enabled] BIOS EHCI Hand-off [Enabled] BIOS EHCI Hand-off [Enabled]
Allows you to enable support for operating systems without an EHCI hand-
off feature. Configuration options: [Disabled] [Enabled]
4.4.2 4.4.2 4.4.2

MPS Configuration

MPS Configuration MPS Configuration
4.4.2 4.4.2 MPS Configuration MPS Configuration
Advanced
MPS Configuration
MPS Revision
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
MPS Revision [1.4] MPS Revision [1.4]
MPS Revision [1.4] MPS Revision [1.4] MPS Revision [1.4]
Allows you to select the multi-processor system version.
Configuration options: [1.1] [1.4]
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
BIOS SETUP UTILITY
[1.4]
Select MPS Revision.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4 - 1 9 4 - 1 9 4 - 1 9
4 - 1 9 4 - 1 9