Installing A Dimm; Removing A Dimm - Asus TS100-E3 Manual

2.4.3 2.4.3 2.4.3

Installing a DIMM

Installing a DIMM Installing a DIMM
2.4.3 2.4.3 Installing a DIMM Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the
motherboard and the components.
To install a DIMM:
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket so
that the notch on the DIMM
matches the break on the
socket.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
• A DDR2 DIMM is keyed with a notch so that it fits in only one direction.
Do not force a DIMM into a socket to avoid the DIMM damage.
• The DDR2 DIMM sockets do not support DDR DIMMs. DO not install
DDR DIMMs to the DDR2 DIMM sockets.
2.4.4 2.4.4 2.4.4

Removing a DIMM

Removing a DIMM Removing a DIMM
2.4.4 2.4.4 Removing a DIMM Removing a DIMM
To remove a DIMM:
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly with
your fingers when pressing
the retaining clips. The DIMM
might get damaged when it
flips out with extra force.
2. Remove the DIMM from the socket.
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
3
1
U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p
U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p
1
D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h
D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h
2
D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h
D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h D D R 2 D I M M n o t c h
2
1
2 - 1 1 2 - 1 1 2 - 1 1
2 - 1 1 2 - 1 1