Front I/O Board; Power Supply Unit - Asus TS100-E3 Manual

2.11 Removable components
You may need to remove previously installed system components when
installing, removing system devices, or when replacing defective components.
This section tells how to remove the following components:
1. Chassis fan
2. Floppy disk drive module
3.

Front I/O board

4.

Power supply unit

2.11.1 2.11.1 Chassis fan Chassis fan
2.11.1 2.11.1 Chassis fan 2.11.1 Chassis fan Chassis fan
To remove the chassis fan:
1. Unplug the chassis fan cable fon
the REAR_FAN1 connector on the
motherboard.
2. Locate the four screws that
secure the fan to the chassis.
3. Remove the four screws while
carefully supporting the chassis
fan with your free hand to prevent
it from falling off.
Set the screws aside.
4. Carefully remove the chassis fan.
A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3
2 - 2 7 2 - 2 7 2 - 2 7
2 - 2 7 2 - 2 7