To remove the power supply unit (PSU):
1.
Remove the chassis cover. Refer to section "2.1.1 Removing the side
cover."
2.
Remove the front panel assembly. Refer to section "2.5.1 Removing the
front panel assembly.
3.
Lay the chassis on a flat, stable
surface.
4.
Disconnect all the power plug to
the connector inside the case.
5.
Locate and remove the screws
that secure the PSU bracket to
the chassis.
6.
Slide the bracket in the direction
of the arrow and remove it from
the chassis.
2 - 3 4
2 - 3 4
2 - 3 4
2 - 3 4
2 - 3 4
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p