Supermicro SuperServer 5019C-M4L User Manual page 66

SuperServer 5019C-M4L User's Manual
Memory Configuration

•
Memory RC Version
•
Memory Frequency
•
Memory Timings (tCL-tRCD-tRP-tRAS)
•
DIMMA1 ~ DIMMB2 information
Maximum Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1067, 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400,
2600, and 2667.
ECC Support
Use this feature to enable Error Checking & Correction (ECC) support for onboard
memory modules. The options are Disabled and Enabled.
Max TOLUD
This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable
DRAM" memory space to be used by internal graphic devices, GTT Stolen Memory, and
TSEG, respectively, if these devices are enabled. The options are Dynamic and 1 GB
~ 3.5 GB (in 0.25 GB increments).
Memory Scrambler
This feature enables memory scrambler support for memory error correction. The settings
are Disabled and Enabled.
Fast Boot
Use this feature to enable or disable fast path through the memory reference code (MRC).
The options are Disabled and Enabled.
REFRESH_2X_MODE
Use this feature to select the memory controller 2x refresh rate mode. The options are
Disabled, 1- Enabled for WARM or HOT, and 2- Enabled HOT only.
DMI/OPI Configuration

The following DMI information will display:
•
DMI
66