Table of Contents
Advertisement
3. After locating the healthy BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.
Note: At this point, you may decide if you want to start the BIOS recovery. If you decide
to proceed with BIOS recovery, follow the procedures below.
4. When the screen as shown above displays, use the arrow keys to select the item
"Proceed with flash update" and press the <Enter> key. You will see the BIOS recovery
progress as shown in the screen below.
Note: Do not interrupt the BIOS flashing process until it has completed.
Appendix D: UEFI BIOS Recovery
123
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperServer 5019C-M4L and is the answer not in the manual?