Installing The Fuselage Servos - Seagull Models Swift 40 Assembly Manual

SWIFT40.
2) Use balsa plywood to help prevent
moveable from transferring to the fuel tank as
shown.
C/A glue.
Balsa wood included.
B
C/A glue.
Fuel pick up tube.
8
A
Fuel tank.
Vent tube.
Fuel fill tube.
Instruction Manual.
3) Connect the lines from the tank to the engine
and muffler. The vent line will connect to the
muffler and the line from the clunk to the
carburetor.
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air
should flow through easily.

INSTALLING THE FUSELAGE SERVOS.

Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the
servo into the aileron servo mount.
2) Secure the servos with the screws
provided with your radio system.
Rudder servo.
Elevator servo.
Throttle servo.