Seagull Models Swift 40 Assembly Manual page 16

SWIFT40.
Cut.
INSTALLING THE RECEIVER AND BATTERY.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bottom
of fuselage using a plastic tape.
16
8mm.
Instruction Manual.
Receiver.
Battery.
ATTACHMENT WING-FUSELAGE.
Wing bolt.
TAIL - DRAGGER CONVERSION.
M3x12mm.