ZyXEL Communications GS1915 Series User Manual page 197

Figure 137 Advanced Application > Errdisable > Errdisable Status
The following table describes the labels in this screen.
Table 91 Advanced Application > Errdisable > Errdisable Status
LABEL DESCRIPTION
Inactive-reason
mode reset
Port List Enter the number of the ports (separated by a comma) on which you want to reset inactive-
reason status.
Cause Select the cause of inactive-reason mode you want to reset here.
Reset Press to reset the specified ports to handle ARP, BPDU or IGMP packets instead of ignoring them,
if the ports is in inactive-reason mode.
Errdisable Status
Port This is the number of the port on which you want to configure Errdisable Status.
Cause This displays the type of the control packet received on the port or the feature enabled on the
port and causing the Switch to take the specified action.
Active This field displays whether the control packets (ARP, BPDU, and/or IGMP) detecting are enabled
or not. It also shows whether loop guard is enabled on the port. You can configure these settings
under Advanced Application > Errdisable > Errdisable Detect and Advanced Application > Loop
Guard screen.
Chapter 25 Error-Disable
GS1915 Series User's Guide
197