ZyXEL Communications GS1915 Series User Manual page 52

8/24-port gigabit smart managed layer-2 switch
Table of Contents

Advertisement

Each field is described in the following table.
Table 12 Wizard > Basic > Step 3 Link Aggregation
LABEL
DESCRIPTION
Link Aggregation
T1-Tx
Click the arrows to add or delete icons located on the left to desired preference.
Select Static if the ports are configured as static members of a trunk group.
Select LACP if the ports are configured to join a trunk group through LACP.
Previous
Click Previous to show the previous screen.
Next
Click Next to show the next screen.
Cancel
Click Cancel to exit this screen without saving.
After clicking Next, the Summary screen appears.
Figure 35 Wizard > Basic > Step 4 Summary
Each field is described in the following table.
Table 13 Wizard > Basic > Step 4 Summary
LABEL
DESCRIPTION
Setup IP
Host Name
This field displays a host name.
IP Interface
This field displays whether the WAN interface is using a DHCP IP address or a static IP
address.
VID
This field displays the VLAN ID.
IP Address
The Switch needs an IP address for it to be managed over the network.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address.
Chapter 4 Web Configurator
GS1915 Series User's Guide
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs1915-8Gs1915-8epGs1915-24eGs1915-24ep

Table of Contents