Table 24 Status > Neighbor > Neighbor Detail (continued)
LABEL
DESCRIPTION
Location
This shows the geographic location of the neighbor device. This field will show "–" for
devices that do not support the ZON utility.
Reset to Default
Click the Reset button to reset the neighbor device to its factory default settings. A
warning message "Are you sure you want to load factory default?" appears prompting
you to confirm the action. After confirming the action a count down button (from 5 to 0)
starts.
Note:
•
•
•
Chapter 7 Status
The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
If multiple neighbor devices use the same port, the Reset button is not available.
You can only reset Zyxel powered devices that support the ZON utility.
GS1915 Series User's Guide
84