ZyXEL Communications GS1915 Series User Manual page 79

Figure 59 Status (for PoE models)
The following table describes the labels in this screen.
Table 22 Status
LABEL DESCRIPTION
Device Information
Device Type This field displays the model name of this Switch.
System Name This field displays the name used to identify the Switch on any network.
Boot Version This field displays the version number and date of the boot module that is currently on the
Switch.
System Location This field displays the geographic location of your Switch. You can change the setting in the
Basic Setting > General Setup screen.
Firmware This field displays the version number and date of the firmware the Switch is currently running.
Version
System Time This field displays the current date and time in the UAG. The format is mm-dd-yyyy hh:mm:ss.
Serial Number This field displays the serial number of this Switch. The serial number is used for device tracking
and control.
System Up Time This field displays how long the Switch has been running since it last restarted or was turned on.
MAC Address This field displays the MAC addresses of the Switch.
Login This field displays how many minutes a management session can be left idle before the session
Timeout(mins) times out. After it times out you have to log in with your password again.
Hybrid Mode This field displays whether the Switch is in Standalone mode or Cloud mode.
Chapter 7 Status
GS1915 Series User's Guide
79