8. Storage and disposal
8.1 Storage
Use the following procedure to store the pump:
1.
Shut down the pump as described in
2.
Disconnect the pump from the electrical supply.
3.
Place and secure protective covers over the inlet and outlet ports.
4.
Store the pump in cool, dry conditions until required for use. When required,
prepare and install the pump as described in
8.2 Disposal
WARNING:
Do not incinerate fluoroelastomer or perfluoroelastomer seals, tip seal material or
O‑rings.
Dispose the pump and any components removed from it safely in accordance with all
local and national safety and environmental requirements.
Take particular care with components and waste oil which have been contaminated with
dangerous process substances.
A73001880_N
A73001880_N - Storage and disposal
Page 34
Shut down
on page 26.
Installation
on page 17.
11/2020 - ©Edwards Limited