Edwards XDS35iC Instruction Manual page 3

Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
The following product
XDS35i scroll pump, set to High volts
XDS35i scroll pump, set to Low volts
XDS35i scroll pump, no gas ballast
XDS35iC scroll pump
XDS35iE scroll pump, enhanced
XDS35iE scroll pump, enhanced, no gas ballast
XDS35iCE scroll pump, enhanced
XDS46i scroll pump
XDS46iC scroll pump
II Internal 3 G Ex h IIB T4 Gc
XDS100B scroll pump Note: no ATEX rating
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
2014/34/EU
2014/30/EU
2011/65/EU
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009 Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN ISO 80079-36:2016
EN ISO 80079-37:2016
EN 61326-1:2013
Documentation Officer:
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 29
Petr Smerek – Engineering Manager
Scientific Vacuum Division
Lutin
CE Declaration of Conformity
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60 Hz
100-120 V, 200-230 V, 1 ph, 50/60Hz
Machinery directive
ATEX directive on use in potentially explosive atmospheres
Electromagnetic compatibility (EMC) directive
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'',
liquid immersion ''k''
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
Class A Emissions, Industrial Immunity
Jelena Havelkova, Spielberk Office Centre, Holandska 10, Brno, 63900 Czech Republic,
: +42(0) 734 418 896, : documentation@edwardsvacuum.com
th October 2019
Ian Keech – General Manager
Product Company
Lutin
A730-YY-983
A730-YY-986
A730-05-983
A730-06-983
A730-03-983
A730-07-983
A730-08-983
A731-01-983
A731-06-983
YY = 00 to 99
A732-01-983