Service Kits; Tip Seal And Exhaust Service Kit; Bypass Valve Kit; Gas Ballast Kit - Edwards XDS35iC Instruction Manual

9.4 Service kits

9.4.1 Tip seal and exhaust service kit

The kit, part number is A73001801, contains all the necessary components to replace
the tip seal and exhaust valve. Tip seals should be replaced as a pair and only simple
tools are required. This kit is suitable for XDS35i and XDS35iE.
Same kit is available for chemical resistance version of pumps XDS35iC and XDS35iCE
under part number A73008801.
A chemical resistance exhaust valve kit can be purchased separately under part number
A73001814.

9.4.2 Bypass valve kit

The kit, part number A73003804, contains 3 sets of valve pad, spring and O‑ring for
replacement the by‑pass valves. This kit is suitable for XDS35iE
Same kit is available for chemical resistance version of pumps XDS35iC and XDS35iCE
under part number A73008804.

9.4.3 Gas ballast kit

The kit, part number A73001803, contains all the necessary components for exchanging
gas ballast valve. This kit is suitable for XDS35i (Gas Ballast version)
Same kit is available for chemical resistance version of pumps XDS35iC and XDS35iCE
under part number A73001815.
A73001880_N
A73001880_N - Service and spares
Page 37 11/2020 - ©Edwards Limited