Changing Or Cleaning The Edge Filter - WAGNER AirCoat GM 4100 AC Operating Manual

VERSION 01/2018

8.2.5 CHANGING OR CLEANING THE EDGE FILTER

1. Flush and clean the spray gun in accordance with Chapter
8.1.2.
2. Relieve the pressure of the spray gun and device.
3. Secure the spray gun with the trigger locking device.
4. Place the size A open-end wrench on the filter socket (32)
and hold it in place.
5. Loosen the product hose (33) with a size B open-end
wrench.
6. Place the size B open-end wrench on the filter housing
(30) and hold it in place.
7. Loosen the filter housing (30) with a size A open-end
wrench.
8. Remove the edge filter (31).
9. Clean the filter housing (30), filter socket (32) and edge
filter with flushing agent.
Assembly:
10. Fit the cleaned or new edge filter (31) into the filter socket
(32).
11. Screw on filter socket (32) by hand and tighten with two
open-ended wrenches.
12. Place the product hose (33) on the filter socket (32) and
tighten with two open-ended wrenches.
ORDER NUMBER DOC 394821
Counterhold
B
31
A
B
30
32
33
B_02272
31