Return; Disposal; Software History; Contact Addresses Of Endress+Hauser - Endress+Hauser Levelflex M FMP45 Operating Instructions Manual

Guided level-radar hart/4...20 ma
Hide thumbs Also See for Levelflex M FMP45:
Table of Contents

Advertisement

Levelflex M FMP45 with HART/4...20 mA
Software version / Date
V 01.02.02 / 08.2003
V 01.02.04 / 07.2004
V 01.02.06 / 01.2005
V 01.04.00 / 03.2006
Endress + Hauser
9.5

Return

The following procedures must be carried out before a transmitter is sent to Endress+Hauser e.g.
for repair or calibration:
• Remove all residue which may be present. Pay special attention to the gasket grooves and crevices
where fluid may be present. This is especially important if the fluid is dangerous to health, e.g.
corrosive, poisonous, carcinogenic, radioactive, etc.
• Always enclose a duly completed "Declaration of contamination" form (a copy of the "Declaration
of contamination" is included at the end of this operating manual). Only then can Endress
+Hauser transport, examine and repair a returned device.
• Enclose special handling instructions if necessary, for example a safety data sheet as per EN 91/
155/EEC.
Additionally specify:
• An exact description of the application
• The chemical and physical characteristics of the product
• A short description of the error that occurred (specify error code if possible)
• If necessary, give the error code
9.6

Disposal

In case of disposal please seperate the different components according to their material consistence.
9.7

Software history

Software changed
Original software.
Operated via:
– ToF Tool
– Commuwin II (as of Version 2.08-1 Update C)
– HART-Communicator DXR375 withRev. 1, DD 1.
"mapping" function improved
Function "cho lost" improved
function "detection window"
9.8

Contact addresses of Endress+Hauser

Contact addresses can be found on our homepage: www.endress.com/worldwide. If you have any
questions, please do not hesitate to contact your Endress+Hauser representative.
Documentation changes
Specification of the measuring accuracy at the end of probe
• Description of Instrument Functions
• Operating menu extended see Cap. 11.1
Trouble-shooting
79

Advertisement

Table of Contents
loading

Table of Contents