Endress+Hauser Levelflex M FMP45 Operating Instructions Manual page 87

Levelflex M FMP45 with HART/4...20 mA
External standards and
guidelines
Pressure Equipment Directive
!
Endress + Hauser
EN 60529
Protection class of housing (IP-code)
EN 61010
Safety regulations for electrical devices for measurement, control, regulation and laboratory use.
EN 61326
Emissions (equipment class B), compatibility (appendix A - industrial area)
NAMUR NE 21
Electromagnetic Compatibility (EMC) of Industrial Process and Laboratory Control Equipment.
NAMUR NE 43
Standardization of the Signal Level for the Failure Information of Digital Transmitters.
The FMP 45 corresponds to the 97/23/EC Directive (Pressure Equipment Directive). It is a
pressure accessory with a volume < 0.1 l, corresponding to Category I.
Conformity assessment was carried out as per Module A, the design as per EN 13445 and AD 2000
technical specifications. FMP 45 is not suitable for use with unstable gases at nominal pressures
above 200 bar.
10.1.8 Supplementary Documentation
Note!
This supplementary documentation can be found on our product pages on www.endress.com.
• Technical Information (TI386F/00/en)
• Safety Manual "Functional safety manual" (SD174F/00/en)
• Certificate "Allgemeine bauaufsichtliche Zulassung" (ZE256F/00/de)
Technical data
87