Levelflex M FMP45 with HART/4...20 mA
Endress + Hauser
11.3.2
Equipment architecture
On-site operation:
• with display and operating module VU331,
• with a Personal Computer, FXA193 (RS232C) or FXA291 and ToF Adapter FXA291 (USB) and
the operating software "ToF Tool - FieldTool Package" respectively "FieldCare".
The ToF Tool is a graphical operating software for instruments from Endress+Hauser that operate
based on the time-of-flight principle (radar, ultrasonic, guided micro-impulse). It assists with
commissioning, securing data, signal analysis and documentation of the measuring point.
11.3.3
Patents
This product may be protected by at least one of the following patents.
Further patents are pending.
• US 5,661,251 i EP 0 780 664
• US 5,827,985 i EP 0 780 664
• US 5,884,231 i EP 0 780 665
• US 5,973,637 i EP 0 928 974
Appendix
91