Endress+Hauser Levelflex M FMP45 Operating Instructions Manual page 33

Levelflex M FMP45 with HART/4...20 mA
Endress + Hauser
5.1.1 General structure of the operating menu
The operating menu is made up of two levels:
• Function groups (00, 01, 03, ..., 0C, 0D):
The individual operating options of the instrument are split up roughly into different function
groups. The function groups that are available include, e.g.: "basic setup", "safety settings.",
"output", "display", etc.
• Functions (001, 002, 003, ..., 0D8, 0D9):
Each function group consists of one or more functions. The functions perform the actual operation
or parameterisation of the instrument. Numerical values can be entered here and parameters can
be selected and saved. The available functions of the "basic setup" (00) function group include,
e.g.: "tank properties" (002), "medium property" (003), "process cond." (004), "empty
calibr." (005), etc.
If, for example, the application of the instrument is to be changed, carry out the following
procedure:
1. Select the "basic setup" (00) function group.
2. Select the "tank properties" (002) function (where the existing tank shape is selected).
5.1.2 Identifying the functions
For simple orientation within the function menus, for each function a position is shown on the
display.
The first two digits identify the function group:
• basic setup 00
• safety settings 01
• linearisation 04
...
The third digit numbers the individual functions within the function group:
• basic setup 00
Here after the position is always given in brackets (e.g. "tank properties" (002)) after the described
function.
→
• tank properties
• medium property
• process cond.
...
Operation
L00-FMRxxxxx-07-00-00-en-005
002
003
004
33