Table of Contents
Advertisement
Setting up and using the home screen applications
Setting up and using the home screen applications
Notes:
•
Your home screen, icons, and buttons may vary depending on your home screen customization settings,
administrative setup, and active embedded applications.
•
There may be additional solutions and applications available for purchase. For more information, go to
www.lexmark.com
Finding the IP address of the scanner
Notes:
•
Make sure your scanner is connected to a network or to a print server.
•
An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
You can find the scanner IP address:
•
From the top left corner of the scanner home screen.
•
From the TCP/IP section in the Network/Ports menu.
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section.
Finding the IP address of the computer
For Windows users
1
In the Run dialog box, type cmd to open the command prompt.
2
Type ipconfig, and then look for the IP address.
For Macintosh users
1
From System Preferences in the Apple menu, select Network.
2
Select your connection type, and then click Advanced > TCP/IP.
3
Look for the IP address.
Accessing the Embedded Web Server
The Embedded Web Server is the scanner Web page that lets you view and remotely configure scanner and printer
settings even when you are not physically near the scanner.
1
Obtain the scanner IP address:
•
From the scanner home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
or contact the place where you purchased the scanner.
19
Advertisement
Table of Contents
