GeoVision GV-EBX1100 Series Firmware Manual page 51

[Information] Displays the version of the camera, time of the local
computer, time of the camera (host time), the number of users logging in
the camera and the OCX registration path.
[Video] Displays the current video codec, resolution and data rate.
[Audio] Displays the audio data rates when the microphone and
speaker devices are enabled.
[I/O Control] Note this function is only supported by cameras with I/O
function. Provides a real-time graphic display of the input and output
status. You can force the output to be triggered by double-clicking its
icon.
[Alarm Notify] Displays the captured images by sensor triggers and
motion detection. For this function to work, you have to configure the
Alarm Notification settings first. See 3.2.6 Alarm Notification.
[Camera Adjustment] Allows you to adjust the image quality settings.
Click Save to store the changes to the settings. Note that this function is
only accessible for Administrator.
Brightness: Adjusts the brightness of the image.
Contrast: Adjusts the relative differences between one pixel and the
next.
Saturation: Adjusts the saturation of the image.
Sharpness: Adjusts the sharpness of the image
Gamma: Adjusts the relative proportions of bright and dark areas
White balance: The camera automatically adjusts the color to be
closest to the image you are viewing. You can choose one of the four
presets: Auto, Outdoor, Fluorescent, and Tungsten Lamp. You
can also choose Manual to adjust the white balance manually.
Flicker less: The camera automatically matches the frequency of
your camera's image to the frequency of indoor light sources, e.g.
fluorescent lighting. You can also select 50 Hz or 60 Hz manually. If
these don't match, faint light and dark bars may appear in your
30