GeoVision GV-EBX1100 Series Firmware Manual page 131

Server Port: Modify the port number of the SMTP Server. Or keep
the default value 25.
From email address: Type the sender's e-mail address.
Send to: Type the e-mail address(s) you want to send alerts to.
Alerts Interval Time: Specify the interval between e-mail alerts. The
interval is between 0 and 60 minutes. The option is useful for the
frequent event occurrence, by which any event triggers during the
interval period will be ignored.
[Need authentication to login] If the SMTP Server needs authentication,
enable this option and type a valid username and password to log in the
SMTP server.
[E-Mail Alarm Settings] You can choose to automatically send an e-mail
alert under these conditions: tampering alarm, disk write error (Rec Error),
full memory card (HD Full), motion detection and input trigger. Note that
the alert condition is only supported if the corresponding function is
supported in that camera model.
IMPORTANT: To send e-mail alerts upon motions, be sure to set up
detection area on the Motion Detection's page.
For the related settings to send e-mail alerts, see 4.1.2 Motion Detection,
4.3.1 Input Setting and 4.5 Monitoring.
Note: For GV-BX12201, the maximum resolution of the captured still
image sent by E-mail alert is 1 MP.
[E-Mail Mail Content] You can type the mail subject and mail content in
the Subject and Note columns. The default mail subject is the camera
model name.
110