I/O Monitoring Settings - GeoVision GV-EBX1100 Series Firmware Manual

4.6.2 I/O Monitoring Settings

Note this function is only supported by cameras with I/O function.
You can set the schedule for I/O monitoring to start.
Span 1- Span 3: Set different time frames during the day to enable
I/O monitoring. Each day can be divided into 3 time frames,
represented by Span 1 to Span 3.
Weekend: Enable this option to start I/O monitoring all day on the
weekend and define whether your weekend includes Saturday and
Sunday or Only Sunday.
Special Day: Enable I/O monitoring on a specified day.
Note: In Recording Schedule and I/O Monitoring Schedule, if the
settings for Special Day conflict with those for Span 1-3 or Weekend,
the Special Day settings will get the priority.
Figure 4-37
4 4
Administrator Mode
133