7.4.2 Connecting to the IP Camera
Depending on where you save the created E-Map file (DVR, E-Map Server
or Control Center), the steps to open the Remote E-Map window for
monitoring may vary slightly. The following is the connection example when
you store the E-Map file on the DVR.
1.
To enable the remote access to the DVR, click the Network button,
select WebCam Server to display the Server Setup dialog box, and
click OK to start the WebCam Server.
2.
At the local computer, open the web browser and type the address of
the DVR. The Single View page appears.
3.
Select Emap. A valid user name and password are required for login.
For the first-time user, you will be directed to the Download page.
Install the E-Map program before you can run it.
4.
On the Remote E-Map window, click the Login button and select the
camera host to access its videos and I/O devices. A valid user name
and password are required to log in the camera.
For details on the Remote E-Map functions, see "E-Map Applications",
GV-DVR User's Manual or GV-VMS User's Manual on the Surveillance
System Software DVD.
214