GeoVision GV-EBX1100 Series Firmware Manual page 161

Network name (SSID): The SSID (Service Set Identify) is a unique
name that identifies a particular wireless network. Type SSID of the
Wireless LAN group or Access Point you are going to connect to.
Access Point Survey: Click this button to search all the available
Access Points (Infrastructure mode) and wireless stations (AD-Hoc
mode) within the LAN.
Authentication Type: Select one of these network authentication and
data encryption: Disable, WEP, WPAPSK-TKIP, WPAPSK-AES,
WPA2PSK-TKIP or WPA2PSK-AES.
Disabled: No authentication is needed within the wireless network.
WEP (Wired Equivalent Privacy): A type of data encryption.
Type up to four WEP Keys in HEX or ASCII format. Note that if
you use HEX format, only digits 0-9 and letters A-F, a-f are valid.
WPAPSK-TKIP and WPA2PSK-TKIP: Type WPA-PSK (Pre-
Shared Key) for data encryption.
WPAPSK-AES and WPA2PSK-AES: Type WPA-PSK (Pre-
Shared Key) for data encryption.
For step-by-step instruction on wireless connection, see 2.1.3 Configuring
the Wireless Connection.
Note:
1. Your encryption settings must match those used by the Access Points
or wireless stations with which you want to associate.
2. When you lose the wireless access, you can still access the unit by
connecting it to a LAN and search for the camera using GV IP Device
Utility.
3. When Ad Hoc is used, only WEP encryption is supported.
140