Monitoring Settings For Gv-Ebl2101 / 2111 / 3101 - GeoVision GV-EBX1100 Series Firmware Manual

Recording Profile: This setting is only applicable for recording to the
camera's memory card. Select Performance to maximize the lifespan
of the memory card by restricting the frame rate to 30 fps and
maximum bit rate to 4 Mbit. Select Quality to adopt your current
settings. The default setting is Performance.
Record audio: Activates audio recording when an event occurs.
Recording Policy: By default, the camera will only record to the
memory card when the camera is not streaming live view to other
applications (e.g. GV-VMS) or Web browser. Alternatively, you can
set the camera to always record to the memory card as a secondary
backup.
Note: When the camera is recording to the memory card, it is
recommended to connect no more than two connections to the camera
using Web interface or other applications.

4.5.1 Monitoring Settings for GV-EBL2101 / 2111 / 3101

In the Monitoring Settings page for GV-EBL2101 / 2111 / 3101, click Start
to activate e-mail and FTP alert functions. Be sure to complete related
settings on the Motion Detection, email and FTP pages.
Figure 4-35
4 4
Administrator Mode
131