GeoVision GV-EBX1100 Series Firmware Manual page 107

5. To ignore motion detection in a certain area:
A. Select Non Detection Zone and draw an area to mask off an
unwanted area on the live view.
B. Click Fix to confirm your setting.
C. To create several non detection zones, repeat steps 5A and 5B.
6. To activate motion detection at specific time periods each day, create
a schedule.
Span 1- Span 3: Set a different time frame during the day.
Each day can be divided into 3 time frames, represented by
Span 1 to Span 3.
Only Saturday: Enable the motion detection function only on
Saturday.
Only Sunday: Enable the motion detection function only on
Sunday.
Special Day: Enable the motion detection function on a
specified day.
7. Click the Apply button to start motion detection.
8. To trigger the alarm output when motion is detected, enable Input
monitoring manually or by schedule. To configure the input monitoring,
see 4.5 Monitoring.
9. To trigger the e-mal alert and upload captured images to FTP server
when motion is detected, configure e-mail and FTP servers and select
Motion Detection alarm. See 4.4.1 E-Mail and 4.4.2 FTP.
10. To notify GV-Center V2, GV-Vital Sign Monitor and GV-VMS when
motion is detected, enable the connection to these systems. See
4.4.3 Center V2, 4.4.4 Vital Sign Monitor and 7.2 Setting up IP
Cameras on GV-VMS.
86