Table of Contents
Advertisement
3. Click
to select the local upgrade file and then click
upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Do not disconnect the power of the camera
during the upgrading process. The camera reboots automatically after upgrading.
7.2.2 Log Searching
Purpose:
The operation, alarm, exception and information of the camera can be stored in log files. You can
also export the log files on your demand.
Before you start:
Configure network storage for the camera or insert a memory card in the camera.
Steps:
1. Enter the Log interface:
Configuration >System > Maintenance > Log
2. Set the log search conditions to specify the search, including the Major Type, Minor Type, Start
Time and End Time as shown in Figure 7-11.
3. Click
to search log files. The matched log files will be displayed on the Log List.
User Manual of PanoVu Series Network Camera
Figure 7-10 Remote Upgrade
Figure 7-11 Log Searching Interface
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
98
to start remote
Advertisement
Table of Contents
