HIKVISION DS-2DP0818Z-D User Manual page 104

Note:
Clicking
the IP address and user information. Use this button with caution.
 Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click
configuration file.
 Importing Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click to select the local configuration file and then click
importing configuration file.
Note:
You need to reboot the camera after importing configuration file.
 Upgrading the System
Steps:
1. Enter the Upgrade & Maintenance interface:
Configuration >System > Maintenance > Upgrade & Maintenance
2. Select Firmware or Firmware Directory.
 Firmware: when you select Firmware, you need to find the firmware in your computer to
upgrade the device.
 Firmware Directory: You need to find the directory where the firmware locates. The
device can find the firmware in the directory automatically.
User Manual of PanoVu Series Network Camera
button will restore all the parameters to default settings including
Figure 7-8 Restore Default Settings
to select the directory as the saving path to start exporting
Figure 7-9 Import Configuration File
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
97
to start