Handling Exception; Smart Event Configuration; Detecting Audio Exception - HIKVISION DS-2DP0818Z-D User Manual

6. You can copy the settings to other alarm outputs.
7. Click

6.1.6 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and
illegal login to the cameras.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Step 6 in Section
6.1.1 Configuring Motion Detection.
3. Click

6.2 Smart Event Configuration

6.2.1 Detecting Audio Exception

Purpose:
When you enable this function and audio exception occurs, the alarm actions will be triggered.
User Manual of PanoVu Series Network Camera
to save the settings.
Figure 6-12 Exception Settings
to save the settings.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
74