Configuring Alarm Output - HIKVISION DS-2DP0818Z-D User Manual

6.1.5 Configuring Alarm Output

Steps:
1. Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2. Select one alarm output channel in the Alarm Output dropdown list.
3. Set a name in
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The delay
time refers to the time duration that the alarm output remains in effect after alarm occurs.
5. Click
configuration is the same as the settings of the arming schedule for motion detection. Refer to
Step 5 in Section 6.1.1 Configuring Motion Detection.
User Manual of PanoVu Series Network Camera
Figure 6-10 Linkage Method
tab to enter the arming schedule setting interface. The time schedule
Figure 6-11 Alarm Output Settings
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
for the alarm output (optional).
73