Table of Contents
Advertisement
5.1.3 Configuring Record Schedule
Before you start:
Make sure a local memory card is inserted in the camera or the network storage is added to the
camera.
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled recording. In
this section, you can follow the instructions to configure the scheduled recording. By default, the
record files of scheduled recording are stored in the memory card (if supported) or in the network
disk.
Steps:
1. Enter the Record Schedule settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
2. Check the Enable checkbox to enable scheduled recording.
3. To set the advanced settings of the camera, click
interface.
User Manual of PanoVu Series Network Camera
Figure 5-5 Record Schedule Interface
Figure 5-6 Record Parameters
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
to enter the advanced settings
58
Advertisement
Table of Contents
