Log Searching - HIKVISION DS-2DP1636Z-D User Manual

3. Click
upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Do not disconnect the power of the camera
during the upgrading process. The camera reboots automatically after upgrading.

7.2.2 Log Searching

Purpose:
The operation, alarm, exception and information of the camera can be stored in log files. You can
also export the log files on your demand.
Before you start:
Configure network storage for the camera or insert a memory card in the camera.
Steps:
1. Enter the Log interface:
Configuration >System > Maintenance > Log
2. Set the log search conditions to specify the search, including the Major Type, Minor Type, Start
Time and End Time as shown in Figure 7-11.
3. Click to search log files. The matched log files will be displayed on the Log List.
User Manual of PanoVu Series Network Camera
to select the local upgrade file and then click
Figure 7-10 Remote Upgrade
Figure 7-11 Log Searching Interface
98
to start remote