Table of Contents
Advertisement
Note:
You can also check the Sync. with computer time checkbox to synchronize the time of the
camera with the time of your computer.
Select the Time Zone
Purpose:
When the camera is taken to another time zone, you can use the Time Zone function to adjust
the time. The time will be adjusted according to the original time and the time difference
between the two time zones.
From the Time Zone dropdown menu as shown in Figure 7-5, select the Time Zone in which
the camera locates.
7.1.3 Configuring RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 Port setting interface:
Configuration > System > System Settings > RS-485
User Manual of PanoVu Series Network Camera
Figure 7-4 Time Sync Manually
Figure 7-5 Time Zone Settings
Figure 7-6 RS-485 Settings
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
95
Advertisement
Table of Contents
