HIKVISION DS-2DP0818Z-D User Manual page 28

Table of Contents

Advertisement

SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25.
E-mail Encryption: Email encryption can be selected among None and SSL. When SSL is selected,
you can check the Enable STARTTLS checkbox to encrypt the email with STARTTLS and the SMTP
port No. is 25. You can uncheck the Enable STARTTLS checkbox to encrypt the email with SSL and
the SMTP should be set as 465.
Note:
STARTTLS protocol must be supported by the email server for email encryption with STARTTLS.
When it is not supported by the email server and the Enable STARTTLS checkbox is checked, the
email will not be encrypted.
Authentication (optional): If your email server requires authentication, check this checkbox to use
authentication to log in to this server and input the login user name and password.
 For your privacy and to better protect your system against security risks, we strongly recommend
the use of strong passwords for all functions and network devices. The password should be
something of your own choosing (Using a minimum of 8 characters, including at least three of
the following categories: upper case letters, lower case letters, numbers, and special characters.)
in order to increase the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Receiver: Inoput the receiver to which the email is sent.
Receiver's Address: The email address of user to be notified.
Note:
You can click
configured.
3. Click
Configuring HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and associated web server that one is communicating
with, which protects against Man-in-the-middle attacks. Perform the following steps to set the port
number of https.
Example:
If you set the port number as 443 and the IP address is 192.168.1.64, you may access the device by
inputting https://192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface.
Configuration > Network > Advanced Settings > HTTPS
2. Create the self-signed certificate or authorized certificate.
User Manual of PanoVu Series Network Camera
to check whether the setting is invalid after the required parameters are
to save the settings.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Panovu series

Table of Contents