Log Searching - HIKVISION DS-2CD63C5G0-IVS User Manual

 Rebooting the Camera
Click Reboot to reboot the network camera.
 Restoring Default Settings
Click Restore or Default to restore the default settings.
Note: After restoring the default settings, the IP address is also restored to the
default IP address, please be careful for this action.
 Exporting/Importing Configuration File
Purpose:
Configuration file is used for the batch configuration of the camera, which can
simplify the configuration steps when there are a lot of cameras needing
configuring.
Steps:
1. Click Export to export the current configuration file, and save it to the
certain place.
2. Click Browse to select the saved configuration file and then click Import to
start importing configuration file.
Note: You need to reboot the camera after importing configuration file.
 Upgrading the System
Click Browse to select the local upgrade file and then click Upgrade to start
remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process. The camera reboots automatically after
upgrading.

5.2.6 Log Searching

Purpose:
The operation, alarm, exception and information of the camera are stored in log files.
You can also export the log files.
Before you start:
User Manual of Network Fisheye Camera
45