Table of Contents
Advertisement
Placing Originals
You can place your originals in the
ADF.
❖ How to place A4, B5 JIS (Japanese
Industrial Standard), A5, 5
1
1
8
/
"x11", 8
/
"x14", and 8"x13" size
2
2
originals
❖ How to place A5 and 8
originals
❒ When sending a fax, the image
1
1
/
"x8
/
",
2
2
❒ Make sure that all ink, correcting
1
1
/
"x5
/
" size
2
2
❒ If you try to scan an almost com-
❒ You can place the original any time
Note
output at the other end depends on
the size and orientation of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and orientation as
that of the original, the fax image
size may be reduced on output,
trimmed at the both edges, or di-
vided into two or more sheets.
When sending an important origi-
nal, we recommend that you ask
the receiver about the size and ori-
entation of the paper used in their
terminal.
fluid, etc. has completely dried be-
fore setting your original. If it is
still wet, the scanner will be
marked and those marks will ap-
pear on the received image. When
the scanner is dirty, a warning
message is displayed after scan-
ning is complete. See p.59 "Scan-
ner Cleaning Message", Advanced
Features.
pletely blank original (for example
the wrong side of an original), an
alarm sounds. See p.59 "Blank
Sheet Detect", Advanced Features.
up until you press the {Start} key.
Placing Originals
2
33
Advertisement
Table of Contents
