Table of Contents
Advertisement
Programming
S
Perform one of the following pro-
cedures:
When the group was assigned to
a Quick Dial key
A Press 0 or 1 to select whether
to change the assigned Quick
Dial key.
3
If you want to assign the Group
to another Quick Dial key, select
"Yes".
If you do not, select "No", and
then proceed to step U.
B Press the {OK} key.
When the group was not
assigned to a Quick Dial key
A Press the {OK} key.
T
Press the Quick Dial key you
want to assign the Group.
U
Press the {OK} key.
If you want to edit another Group,
proceed to step
V
Press the {User Tools} key.
The standby display reappears.
84
F
.
Deleting
Note
❒ When a programmed Group is be-
ing used for a standby Memory
Transmission, you cannot delete
the destination for the Group.
❒ When you delete a destination
from a group programmed in a
Quick Dial or a Speed Dial, the
contents of the Quick Dial or Speed
Dial are not deleted.
To delete a destination from a group
The following procedure describes
how to delete a destination from a
group.
A
Press the {User Tools} key.
B
Press 0 or 1 until " 2. Fax Fea-
tures " is displayed.
ZHMS130E
Advertisement
Table of Contents
