Programming - Ricoh 4430NF Operating Instructions Manual

Programming

Note
❒ There are 200 numbers available.
❒ You can specify codes 000 to 199.
A
Press the {User Tools} key.
B
Press 0 or 1 until "2. Fax Fea-
tures" is displayed.
C
Press the {OK} key.
Confirm that "1. Program / Delete"
is displayed.
D
Press the {OK} key.
E
Press 0 or 1 until " 3. Prog.
Speed Dial " is displayed.
F
Press the {OK} key.
G
Display the number of the Speed
Dial you want to program (000 to
199).
Enter the Speed Dial number with
the number keys, or search using
0 or 1.
ZHMS130E
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If a Speed Dial number has al-
ready been programmed, the
contents are displayed. Press 0
or 1 to select an unprogrammed
number, and then press the
{OK} key.
H
Press the {OK} key.
I
Enter a fax number with the
number keys.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
Speed Dial
3
73