How To Enter Characters - Ricoh 4430NF Operating Instructions Manual

Programming
• QWERTZ layout
• AZERT layout
3
4. {ABC/abc} key (Quick Dial 21, 51,
or 81)
Use to switch between upper and lower
case.
5.
Space key (Quick Dial 29, 59, or
89)
Press to enter a space.
6.
{Symbols} key (Quick Dial 30, 60,
or 90)
Press to enter symbols.
7.
Number keys
Use to enter numbers.
8. {Clear/Stop} key
Deletes the character at the cursor posi-
tion. If the cursor is placed to the right of
the last character at the right end of a line,
that character will be deleted.
88

How to Enter Characters

The following procedure describes
how to enter characters.
Note
ZHMS340E
❒ When you enter a character, it is
displayed at the position of the
cursor. If there is a character at the
cursor position, the entered char-
acter is displayed before the char-
acter.
A
Enter letters, symbols, or num-
ZHMS350E
bers.
Characters are entered and the cur-
sor moves.
• For letters, press the Quick Dial
keys.
• For symbols, press the {Sym-
bols} key and 0 or 1 to select
the symbol, and then press the
{OK} key.
• For numbers, press the number
keys.
Note
❒ When you make a mistake,
press the {Clear/Stop} key.
❒ When you want to insert a char-
acter, move the cursor to the
character right of the position
you want to enter the character,
and enter the character. The in-
serted character is displayed left
of the cursor position.
B
Press the {OK} key.