Polycom VVX 411 Configuration Manual page 11

Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.
TFTP or HTTP & HTTPS
Network Configuration
If there is no DHCP in your network, you can still auto provision your Polycom phone. Please
refer to your Polycom phone model User Guide for instruction about setting static IP address.
After you configure your Polycom phone to use a static IP address, continue with the following
steps.
Open a new browser window and enter your phone IP address, e.g. https://192.168.1.22.
Enter password and press Submit button.
Go to Settings in the upper navigation menu and choose Provisioning Server.
You must choose one of the following Server Type: HTTP, HTTPS or Trivial FTP and press
the Select button.
Depending on what Server Type has been chosen into Server Address field type:
If the Server Type is HTTP or HTTPS enter followed by Hostname or IP Address,
followed then by /prov and press Ok.
Example for Hostname using HTTP: abc.bicomsystems.com/prov
Example for Hostname using HTTPS: abc.bicomsystems.com/prov
Please Note: Our recommendation is to use the Server Type HTTP.
NOTE: Factory default password is: 456.