Video Tutorial; Requirements; Identifying Phone Model; Phone Firmware - Polycom VVX 411 Configuration Manual

This Configuration Guide is written as general guide on how to configure the Polycom phone
model VVX 411 to work with PBXware 5.3.4.

Video Tutorial

Video tutorial explaining Auto Provisioning setup for Polycom Phone on PBXware 5.

Requirements

Identifying phone model

To start and successfully complete registration of your Polycom phone you need to know which
phone model you will setup.
From the back of each Polycom phone there are exact model information that you should check.
Although different phone models can have exactly the same requirements and installation
procedure, phone models can also have significantly different requirements and installation
procedure, so that ignorance of your own model may result in the inability to successfully set up
your phone.

Phone firmware

Make sure that your phone is loaded with firmware version 6.0.0, and Polycom firmware pack is
downloaded and extracted to tftp folder on server. For more information please visit Polycom