Fixed Disk Drive Error Codes (17Xx - Xx Range) - Compaq PORTABLE 386 Maintenance And Service Manual
Personal computer with plasma display
Hide thumbs
Also See for PORTABLE 386:
- Network manual (9 pages) ,
- Service & reference manual (77 pages) ,
- Maintenance and service manual (276 pages)
Table of Contents
Advertisement
1210 - 09
Modem exceeded maximum
redial limit.
1210 - 10
Line quality prevented
remote connection.
1210 - 11
Modem timed out waiting
for remote connection.
==============================================================================
Table 6-11.
Fixed Disk Drive Error Codes (17xx - xx Range)
==============================================================================
Error
Code
Error Description
------------------------------------------------------------------------------
1700 - xx
Fixed Disk Drive ID Test
1700 - 05
Failed to reset controller
1700 - 09
Failed to format a track
1700 - 41
Failed to ID fixed disk drive
(drive not ready).
1700 - 42
Recalibrate fixed disk drive
failed.
1700 - 45
Failed to get fixed disk
drive parameters from ROM.
1700 - 46
Invalid fixed disk drive
parameters found in ROM.
1700 - 66
Failed to initialize fixed
disk drive parameter.
1700 - 69
Failed to read drive size
from controller.
1700 - 70
Failed translate mode.
1700 - 71
Failed nontranslated mode.
------------------------------------------------------------------------------
Error
Code
Error Description
------------------------------------------------------------------------------
1701 - xx
Fixed Disk Format Test
1701 - 05
Failed to reset controller
1701 - 09
Failed to format a cylinder
1701 - 42
Recalibrate fixed disk drive
failed.
1701 - 58
Failed to write sector
buffer.
Recommended Action
The following steps apply to error
codes 1700 - xx through 1717 - 73:
1.
Check the system board jumper
settings and retest (see
Chapter 9, "Jumper and Switch
Settings").
2.
Replace the fixed disk drive
signal and power cables and
retest.
3.
Replace the fixed disk drive
and retest.
4.
Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 1700 - xx through 1717 - 73:
1.
Check the system board jumper
settings and retest (see
Chapter 9, "Jumper and Switch
Settings").
2.
Replace the fixed disk drive
signal and power cables and
retest.
3.
Replace the fixed disk drive
- Quick Links:
- Power Supply
Hide quick links:
Advertisement
Table of Contents
