Compaq PORTABLE 386 Maintenance And Service Manual page 32

601 - xx Format Test
601 - 05 Failed to reset controller
601 - 09 Failed to format a track
601 - 23 Failed to set drive type in
ID media
602 - xx Diskette Read Test
602 - 01 Exceeded maximum soft error
limit
602 - 02 Exceeded maximum hard error
limit
602 - 03 Previously exceeded maximum
soft error limit
602 - 04 Previously exceeded maximum
hard error limit
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
602 - 05 Failed to reset controller
602 - 06 Fatal error while reading
603 - xx Diskette Write/Read/Compare
Test
603 - 07 Fatal error while writing
603 - 08 Failed compare of write/read
buffers
604 - xx Diskette Random Seek Test
604 - 01 Exceeded maximum soft error
limit
604 - 02 Exceeded maximum hard error
limit
604 - 03 Previously exceeded soft
error limit
604 - 04 Previously exceeded hard
error limit
604 - 05 Failed to reset controller
604 - 06 Fatal error while reading
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
the system board and retest
(see Chapter 9, "Jumper and
Switch Settings").
3. Check the diskette power and
signal cable.
4. Replace the diskette power and
signal cables and retest.
5. Replace the diskette drive and
retest.
6. Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 600 - xx through 699 - 00:
1. Replace the diskette and retest.
2. Check the jumper settings on
the system board and retest
(see Chapter 9, "Jumper and
Switch Settings").
3. Check the diskette power and
signal cables.
4. Replace the diskette power and
signal cables and retest.
5. Replace the diskette drive and
retest.
6. Replace the system board and
retest.
Recommended Action