Compaq PORTABLE 386 Maintenance And Service Manual page 41

1704 - 06 Fatal error while reading.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1704 - 40 Cylinder 0 error.
1704 - 55 Cylinder 1 error.
1704 - 65 Exceeded maximum bad sector
per track.
1704 - 70 Failed translate mode.
1704 - 71 Failed nontranslated mode.
1704 - 72 Exceeded maximum bad track
limit.
1704 - 73 Previously exceeded maximum
bad track limit.
1705 - xx Fixed Disk Drive Controller
Test.
1705 - 05 Failed to reset controller.
1705 - 44 Failed fixed disk drive
controller diagnostics.
1705 - 56 Failed controller RAM
diagnostics.
1705 - 57 Failed controller to drive
diagnostics.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1706 - xx Fixed Disk Drive Ready Test
1706 - 41 Drive not ready.
1707 - xx Fixed Disk Drive Recalibrate
Test
1707 - 42 Failed to recalibrate fixed
disk drive.
1708 - xx Fixed Disk Drive Format Bad
Track Test
1708 - 02 Exceeded maximum hard error
limit.
1708 - 05 Failed to reset controller.
Recommended Action
The following steps apply to error
codes 1700 - xx through 1717 - 73:
1. Check the system board jumper
settings and retest
(see Chapter 9, "Jumper and
Switch Settings").
2. Replace the fixed disk drive
signal and power cables and
retest.
3. Replace the fixed disk drive
and retest.
4. Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 1700 - xx through 1717 - 73:
1. Check the system board jumper
settings and retest
(see Chapter 9, "Jumper and
Switch Settings").
2. Replace the fixed disk drive
signal and power cables and
retest.
3. Replace the fixed disk drive
and retest.
4. Replace the system board and
retest.