Compaq PORTABLE 386 Maintenance And Service Manual page 46

Error
Code Error Description
------------------------------------------------------------------------------
1900 - xx Tape Test
1900 - 01 Tape not installed.
1900 - 02 Drive installed in other
drive 3.
1900 - 26 Cannot identify drive.
1900 - 27 Drive not compatible with
controller.
1900 - 92 Tape drive mismatched.
1900 - 93 Tape cartridge mismatched.
1901 - xx Tape Servo Write Test
1901 - 01 Drive not installed.
1901 - 02 Cartridge not installed.
1901 - 03 Tape motion error.
1901 - 04 Drive busy error.
1901 - 05 Track seek error.
1901 - 06 Tape write protected error.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1901 - 07 Tape already servo written.
1901 - 08 Unable to servo write.
1901 - 11 Drive recalibration error.
1901 - 21 Got servo pulses second time
but not first.
1901 - 22 Never got to end of tape
after servo check.
1901 - 25 Unable to erase cartridge.
1901 - 27 Drive not compatible with
controller.
1902 - xx Tape Format Test
Recommended Action
The following codes apply to
error codes 1900 - xx through
1991 - xx:
1. Replace the tape cartridge
and retest.
2. Replace the tape drive
expansion unit and retest.
3. Replace the system board
and retest.
Recommended Action
The following codes apply to
error codes 1900 - xx through
1991 - xx:
1. Replace the tape cartridge
and retest.
2. Replace the tape drive
expansion unit and retest.
3. Replace the system board
and retest.