To replace the LED assembly and the LED/speaker and keyboard cables, reverse
steps 1 through 17.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When replacing the speaker, do not touch the silver speaker surface.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Chapter 8.22 Plasma Display
To remove the Plasma Display:
1.
Complete the preparation procedure (see Section 8.2).
2.
Unlatch the display enclosure by pressing down on the two latches on top
of the display enclosure.
enclosure (Figure 8-69).
CAUTION
Pull the display enclosure away from the main