Compaq PORTABLE 386 Maintenance And Service Manual page 47

1902 - 01 Drive not installed.
1902 - 02 Cartridge not installed.
1902 - 03 Tape motion error.
1902 - 04 Drive busy error.
1902 - 05 Track seek error.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1902 - 06 Tape write protected error.
1902 - 09 Unable to format.
1902 - 10 Format mode error.
1902 - 11 Drive recalibration error.
1902 - 12 Tape not servo written.
1902 - 13 Tape not formatted.
1902 - 21 Got servo pulses second time
but not first.
1902 - 22 Never got to end of tape
after servo check.
1902 - 27 Drive not compatible with
controller.
1902 - 28 Format gap error.
1903 - xx Tape Drive Sensor Test
1903 - 01 Drive not installed.
1903 - 23 Change line unset.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1903 - 27 Drive not compatible with
controller.
1904 - xx Tape Beginning of Tape/End
of Tape Test
1904 - 01 Drive not installed.
1904 - 02 Cartridge not installed.
1904 - 03 Tape motion error.
Recommended Action
The following codes apply to
error codes 1900 - xx through
1991 - xx:
1. Replace the tape cartridge
and retest.
2. Replace the tape drive
expansion unit and retest.
3. Replace the system board
and retest.
Recommended Action
The following codes apply to
error codes 1900 - xx through
1991 - xx:
1. Replace the tape cartridge
and retest.
2. Replace the tape drive
expansion unit and retest.
3. Replace the system board
and retest.