Compaq PORTABLE 386 Maintenance And Service Manual page 36

1203 - 01 Modem external TIP/RING
failed.
1203 - 02 Modem external DATA TIP/RING
failed.
1203 - 03 Modem line termination
failed.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1204 - xx Modem Auto Originate Test
1204 - 01 Modem timed out waiting for
SYNC.
1204 - 02 Modem timed out waiting for
response.
1204 - 03 Modem exceeded data block
retry limit.
1204 - 04 RVC exceeded carrier lost
limit.
1204 - 05 XMIT exceeded carrier lost
limit.
1204 - 06 Time out waiting for dial
tone.
1204 - 07 Dial number string too long.
1204 - 08 Modem timed out waiting for
remote response.
1204 - 09 Modem exceeded maximum
redial limit.
1204 - 10 Line quality prevented
remote connection.
------------------------------------------------------------------------------
Error
Code Error Description
------------------------------------------------------------------------------
1204 - 11 Modem timed out waiting for
remote connection.
1205 - xx Modem Auto Answer Test
1205 - 01 Modem timed out waiting
for SYNC.
1205 - 02 Modem timed out waiting
for response.
1205 - 03 Modem exceeded data block
Recommended Action
The following steps apply to error
codes 1201 - 01 through 1210 - 11:
1. Check the jumper settings on
the system board (see Chapter 9,
"Jumper and Switch Settings").
2. Check the modem connection to
the 32 bit memory/modem
interface board.
3. Replace the modem and retest.
4. Replace the 32 bit memory/modem
interface board and retest.
5. Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 1201 - 01 through 1210 - 11:
1. Check the jumper settings on
the system board (see Chapter 9,
"Jumper and Switch Settings").
2. Check the modem connection to
the 32 bit memory/modem
interface board.
3. Replace the modem and retest.
4. Replace the 32 bit memory/modem
interface board and retest.